Satin additive is used to reduce the gloss of the Bristol Finish Traditional Amber. Results will vary according to amount of additive used. (Refer to satin instructions.)
Frequently Asked Questions
Add 1 cap full of accelerator to 32oz of Part A resin prior to adding catalyst. Stir well ensuring that the accelerator and resin are completely blended. Then add the … More
Accelerator speeds the cure time of the Bristol Finish Traditional Amber line of products. However, this also decreases the amount of time for the product to lay out to a … More
We recommend adding no more than 10% by volume of Tropical Reducer to your working pot.
Adding Tropical Reducer to the Bristol Finish Traditional Amber line of products lengthens the cure time of Bristol Finish allowing it more time to lay out.
Yes. As long as the other finish is intact, in good condition and fully cured according to the manufactures instructions. The only exceptions to this are applying over waxes and … More
Bristol finish Thinner is used to thin the Bristol Finish Traditional Amber line of products if desired. We recommend thinning no more than 10% by volume.